Materials Used; Type Plate And Marking; Intended Use - BRAND HandyStep touch Operating Manual

4 Intended use

ate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Changes or modifications to this equipment not expressly approved by the party responsible for com-
pliance could void the user's authority to operate the equipment.
Canada
This device complies with the Industry Canada RSS-216 standard and operation is subject to the fol-
lowing two conditions:
1.
This device may not cause interference.
2.
This device must accept any interference received, including interference that may cause un-
desired operation of the device.

3.7 Materials used

See Materials used, p. 100.

3.8 Type plate and marking

The device, battery, power adapter and charging stand must be stored and transported in dry condi-
tions; avoid exposure to direct sunlight.
4 Intended use
®
The HandyStep touch and the HandyStep
hand dispensers operated by touchscreen. BRAND precision dispenser tips (PD tips II) with type cod-
ing are automatically recognized by the device according to their nominal volumes and allow quick
volume selection. Compatible dispenser tips from other manufacturers can also be used after manu-
ally selecting the corresponding volume.
64
Operating manual
®
touch S are microprocessor-controlled, battery-powered
HandyStep® touch, HandyStep® touch S 997486