Interrupting And Ending Aliquoting; Options; Multi-Aspiration (Multi-Asp); Multi-Aspiration In Detail - BRAND HandyStep touch Operating Manual

13 Multi-Aspiration (MULTI-ASP)

12.5 Interrupting and ending aliquoting

a.
Tap on the
ð
The current aliquoting is ended.

12.6 Options

a.
In the operating mode, tap on the symbol
ð
The Options menu appears.
Option
'Edit aliquots'
'Work Mode'
13 Multi-Aspiration (MULTI-ASP)
For information on the function of this mode, see Overview of modes, p. 72. For information on setting
the volume, speed, and other steps found in all modes, see Operation, p. 73.

13.1 Multi-Aspiration in detail

13.2 Preparing liquid aspiration

Prerequisite:
>
Tip is empty and outside the liquid.
a.
Press the STEP button.
b.
The piston of the tip moves to the start position.
c.
Select filling mode.
d.
Press and hold the STEP button.
ð
Liquid is aspirated.
90
Operating manual
or the button.
Meaning
Edit an aliquot list.
Shows the help text for the mode.
1
2
3
4
5
.
1 Switch to filling mode. The selected filling mode is
displayed here.
2 Set volume
3 Possible STEPs
4 Aspirated volume
5 Switch between dispensing and aspirating liquid.
You can also switch to dispensing if the nominal vol-
ume has not been reached. In addition, you can also
continue filling the tip after an interruption.
HandyStep® touch, HandyStep® touch S 997486