Assembling Your Treadmill
View From Beneath
Pre-installed
Step 6: Securing Console
A.
Slide the console fully into the mounting brackets. If the console does not
want to slide in completely, loosen the four pre-installed M8 x 15L Bolts
(14) with the provided 6mm Allen wrench to eliminate any friction.
B.
Once the console is fully installed, tighten the four M8 x 15L Bolts.
Step 7: Cup Holder Attachment
A.
Remove the two pre-installed
M4 x 8L Screws (15) with the
provided Phillip's head screwdriver
from the bottom of the Right Cup
Holder.
18
14
6mm Allen
Wrench
A
15
Pre-installed
M8 x 15L
(x4)
M4 x 8L
(x2)
5mm Allen
Wrench w/
Phillips