Table of Contents
Advertisement
Step 3: Upright Post Cover
Attachment
A.
Remove pre-installed M4x8L
Screw (13).
B.
Install the Left Upright Cover
(4) by sliding the front of the
cover around the upright and
centering or aligning the cover
on the upright.
C.
Install the M4 x 8L Screw (13).
D.
Repeat steps A and B for the
Right Upright Cover.
Step 4: Handlebar
Attachment
A.
Place the M8 x 100L Bolt (11)
and M8 washer (12) through
the left handlebar and into
the uprights being careful not
to damage any wires running
through the handlebar. Repeat
for the right handlebar.
B.
Loosely thread both bolts into
the upright prior to tightening.
C.
Fully tighten both handlebar
attachment bolts.
Assembling Your Treadmill
4
13
5mm Allen
Wrench w/
Phillips
11
12
M8 x 100L
(x2)
M4 x 8L
(x4)
6mm Allen
Wrench
M8 Washer
(x2)
15
Advertisement
Table of Contents
