Table of Contents
Advertisement
Assembling Your Treadmill
Step 1: Unpacking
Treadmill
A.
Cut packaging straps and
remove.
B.
Remove the box top.
C.
Remove small parts and
packaging material and unwrap parts.
D.
Cut the corners of the bottom box and remove all packaging material to
begin assembly. The treadmill can be assembled in the box. No need to
pick the treadmill up to remove it from box.
E.
Cut plastic shipping strap holding deck frame to base.
Step 2: Upright Post
Attachment
A.
Carefully fold the uprights
with handlebars up into the
upright position.
B.
Carefully lay handlebars
down as the uprights are
brought up into position.
This will protect against any
accidental damage to wires
coming up through the
upright into the handlebars.
C.
Align the holes in the lower
portion of the upright with
the threaded holes in the
frame.
D.
Install the four M10 x
45L bolts (9) and M10
washers (10), two in each
upright. The best way to
handle this is to loosely
install all four bolts and washers
and then tighten once all bolts are installed.
14
10
9
10
9
M10 x 45L
(x4)
Support
handlebars
as you lift
6mm Allen
Wrench
M10 Washer
(x4)
Advertisement
Table of Contents
