C.
Securely attach the seven remaining cable connectors – There are four
2-pin, two 3-pin and one 10-pin connector that will need to be connected.
1. Attach the 10-pin connectors (7-pin connectors) together (C1) .
2. Attach the wires labeled "SK" together (C2).
3. Attach the White 2-pin connector wires together (C3).
4. Next, attach the two 3-pin connectors (C4) together. There are labels
on these that say L and R. Connect the L to L and the R to R. These are
for the handlebar speed and incline switches.
5. The remaining two 2-pin connectors are for the contact heart rate
sensors and it doesn't matter which gets plugged into the other.
D.
Carefully tuck all wires into the bottom or top console housing.
C4
C5
Note:
C1
C2
Plug the ribbon cables together
so that the gold lines in the ribbon
are on the same side (matching).
Assembling Your Treadmill
5B
17