Replacing The Cover - Epson ActionTower 2000 User Manual
Hide thumbs
Also See for ActionTower 2000:
- Specifications (4 pages) ,
- Read this first manual (56 pages) ,
- Product information manual (11 pages)
Table of Contents
Advertisement
Replacing the Cover
When you are ready to replace the computer's cover, follow
these steps:
1.
Make sure all the internal components are installed
properly.
2.
Check all ribbon cable connections, especially those that
might have been loosened during your work.
3.
Make sure all ribbon cables are out of the way so they do not
catch on the cover.
4.
Slide the cover forward until the flange at the front of the
cover slides between the front bezel and the chassis of the
computer. (See the illustration on page 3-3.)
5.
Replace the six cover retaining screws.
6.
Reconnect the computer to the monitor, printer, keyboard,
and any other peripheral devices you have. Then reconnect
the power cable to the back of the computer and to an
electrical outlet.
3-4
Installing and Removing Options
Advertisement
Table of Contents
