Turning Off The Computer - Epson ActionTower 2000 User Manual

If your system is configured to automatically start Microsoft
Windows™ 'or a word processing program, or has a different
operating system, you will see the first menu or screen of that
program displayed at this point. If your system is not
configured to start like this, you will see the MS-DOS operating
prompt, such as
computer.
Follow the instructions in the "Running the SETUP Program"
section to configure your system using the SETUP program.

Turning Off the Computer

Whenever you turn off your system, follow these steps:
1. Save your data and exit any application program you are
using.
2. Check the hard disk drive light and the diskette drive light(s)
to make sure they are not on. Do not turn off the computer
if a drive light is on, because you can damage the drive or
lose data.
3. Remove any diskette(s) from the diskette drive(s).
4. Press the power button to turn off the computer and then
turn off the monitor, printer, and any other peripheral
devices.
\ > or A: \>, each time you turn on the
C:
Setting Up Your System
®
1-9