Setting Keyboard Options; Setting The Processor Speed - Epson ActionTower 2000 User Manual

Video display type options
Select
EGA/VGA
CGA40*
CGA80*
MONO*
* Forthese options,you must change jumpers J1 and J2 on the system board
to the OFF position. See Chapter 3 for information on setting jumpers

Setting Keyboard Options

Two options in SETUP allow you to control keyboard settings.
The Keyboard option allows you to disable the built-in
keyboard connector.
The NumLock on at boot option determines the initial state of
the Num Lock function when you turn on or reset your system.
When Num Lock is off, the keypad controls cursor movement.
If Num Lock is on, the keypad types numbers.
Select
YES
starts or NO to leave it off.

Setting the Processor Speed

The CPU Speed option sets the processor speed to fast or slow.
At fast speed, your processor operates at its highest speed. At
the slow speed setting, the processor operates at 8 MHz to
provide compatibility with older application programs. Leave
the speed set to fast unless you know that your application
program requires the slow setting.
If
You connected your monitor to the built-in VGA port or you
installed a VGA orenhanced graphics adapter (EGA) card
You installed an optional color graphics adapter set to
40-column color graphics adapter (CGA) mode
You installed a CGA or a multi-mode graphicsadapter
(MGA) attached to a color monitor
You installed a monochrome display adapteroran MGA
attached to a monochrome monitor
to set the Num Lock function on when the system
Setting Up Your System 1-15