Diskette Drive Problems - Epson ActionTower 2000 User Manual

Hide thumbs Also See for ActionTower 2000:
Table of Contents

Advertisement

The diskette is the tight type, but you still see an error.
Check that the diskette is not write-protected, preventing the
drive from writing to the diskette.
Make sure the diskette is form atted. See your operating system
documentation for instructions on formatting diskettes.
You may have a defective diskette. Try copying the files from
the bad diskette to a new diskette.
Something is wrong with the data in the files
If you are using MS-DOS, use SCANDSK or CHKDSK to repair
the files. You may also be able to use special utilities or
diagnostics to solve this problem.

Diskette Drive Problems

A newly installed diskette drive is not working properly.
Make sure you have installed the drive correctly and check all
the cable connections.
You see a diskette drive error when you start your computer.
Run the SETUP program and configure your system for the
correct type of diskette drive. Also check the jumper setting of
J13 to make sure the diskette drive controller is enabled.
The diskette drive is making loud or unusual noises
Contact your Authorized EPSON Servicer.
Troubleshooting
5- 7

Advertisement

Table of Contents
loading

Table of Contents