Important Safety Instructions - Epson Progression Setup Manual

Important Safety Instructions

1. Read all of these instructions and save them for later reference.
Follow all warnings and instructions marked on the computer.
2.
Unplug the computer from the wall outlet before cleaning. Use a
3.
damp cloth for cleaning; do not use liquid or aerosol cleaners.
Do not spill liquid of any kind on the computer.
4.
Do place the computer on an unstable cart, stand, or table.
5.
not
Slots and openings in the cabinet and the back or bottom are
6.
provided for ventilation; do not block or cover these
Do not place the computer near or over a radiator or
register.
Operate the computer using the type of power source indicated
7.
on its label. If you are not sure of the type of power available,
consult your dealer or local power company.
If you plan to operate the computer in
8.
following safety precaution:
To provide adequate shortcircuit protection and over-current
protection for this computer, the building installation must be
protected by a 16 Amp circuit breaker.
Connect all equipment to properly grounded (earthed) power
9.
outlets. If you are unable to insert the plug into an outlet,
contact your
outlets
on the
systems that regularly switch on and off.
10. Do not allow the computer's cord to become damaged or frayed.
to replace your outlet. Avoid using
electrician
same circuit as photocopiers or air control
openings.
heat
observe the
Germany,
i i i