Sunny Health & Fitness PERFORMANCE INTERACTIVE Series User Manual page 8

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
Fig. A
Fig. B
STEP 5
Lock the Rail (No. 8) to the Main
Frame (No. 1) with 4 Bolts (No. 15)
and 4 Flat Washers (No. 25) using
Allen Wrench (No. 110).
Remove 2 Screws (No. 32) from
Adjustment Handle (No. 11) using
Allen Wrench (No. 108).
Lock the Adjustment Handle (No. 11)
to the Axle (No. 13) with 2 Screws
(No. 32) that were just removed using
Allen Wrench (No. 108).
NOTE: The
pre-assembeled into the Seat Bracket
(No. 5), please be carefully not to
separate them.
If the Rail (No. 8) fall apart from the
Seat Bracket (No. 5) before you start
assemble this step, please follow below
steps as shown in Fig. A:
A: Remove 2 Screws (No. 32) from
Adjustment Handle (No. 11) using
Allen Wrench (No. 108).
Lock the Adjustment Handle (No. 11)
to the Axle (No. 13) with 2 Screws
(No. 32) that were just removed using
Allen Wrench (No. 108).
B: Press down the Adjustment Handle
(No. 11), adjust the Upper Block (No.
55) to make sure the cambered surface
is downwards while the rectangle
surface is upwards and parallel to the
Seat Bracket (No. 5). (Fig. B)
C: Insert the Rail (No. 8) to the Seat
Bracket (No. 5) and pull up the
Adjustment Handle (No. 11) to secure
them together.
D: Lock the Rail (No. 8) to the Main
Frame (No. 1) with 4 Bolts (No. 15)
and 4 Flat Washers (No. 25) using
Allen Wrench (No. 110).
7
Rail (No. 8) is