Sunny Health & Fitness PERFORMANCE INTERACTIVE Series User Manual page 6

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
STEP 3
Connect the Pulse Extension Wire 2
(No. 65) to the Pulse Extension Wire
1 (No. 64) and connect the Sensor
Wire (No. 61) to the Sensor Extension
Wire (No. 62). Then connect Tension
Hook (No. 60) with Tension Cable
(No. 59b) as shown in Diagram A.
NOTE: Make
Controller (No. 59a) is at the lowest
level before you connect the cable. This
ensures the wires are at their longest
point. We recommend the assistance of
a second person to help hold the
Handlebar Post (No. 4). This will make
the connection easier when you are
attaching Tension Hook (No. 60) to the
Tension Cable (No. 59b).
Remove 4 Arc Washers (No. 19), 4
Spring Washers (No. 26) and 4
Screws (No. 17) from Main Frame
(No. 1) using Allen Wrench (No. 110).
Insert the Handlebar Post (No. 4) into
the post of the Main Frame (No. 1) with
4 Arc Washers (No. 19), 4 Spring
Washers (No. 26) and 4 Screws (No.
17) that were just removed using Allen
Wrench (No. 110).
NOTE: Ensure that all bolts and
washers are in place and partially
threaded
tightening any of them.
5
sure the Tension
in before completely