Sunny Health & Fitness PERFORMANCE INTERACTIVE Series User Manual page 5

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
ASEMBLY INSTRUCTIONS
STEP 1
Remove the 2 Paper Tubes (No. E)
from the Main Frame (No. 1)
Remove the 4 Carriage Bolts (No. 20),
4 Arc Washers (No. 19) and 4 Cap
Nuts (No.
Stabilizer (No. 2) and the Rear
Stabilizer (No. 3) using Spanner (No.
109).
Attach the Front Stabilizer (No. 2) and
the Rear Stabilizer (No. 3) to the Main
Frame (No. 1) with 4 Carriage Bolts
(No. 20), 4 Arc Washers (No. 19) and
4 Cap Nuts (No. 22) that were just
removed using Spanner (No. 109).
STEP 2
Align the Left Pedal (No. 37L) with the
left side of Crank (No. 42) at 90° and
gently insert the pedal into the crank
arm. Turn the Left Pedal (No. 37L)
counter-clockwise as tightly as you can
with your hands, then use Spanner
(No. 109) to tighten securely.
Align the Right Pedal (No. 37R) with
the right side of Crank (No. 42) at 90°
and gently insert the pedal into the
crank arm. Turn the Right Pedal (No.
37R) clockwise as tightly as you can
with your hands, then use Spanner
(No. 109) to tighten securely.
NOTE: Left Pedal (No. 37L) is marked
with "L" on the pedal, while Right
Pedal (No. 37R) is marked with "R" on
the pedal. Attaching the Pedals (No.
37L/R) to the wrong side of Crank (No.
42) or turning them with the wrong
direction will damage the Crank (No.
42).
4
22) from the Front