General Notes; Intended Use - optris CS Operator's Manual

General notes

1 General notes

1.1 Intended use

Thank you for choosing the optris
The sensors of the optris CS series are non-contact infrared temperature sensors. They calculate the surface
temperature based on the emitted infrared energy of objects [►7 Basics of Infrared Thermometry
The CS sensing head is a sensitive optical system. Please use only the thread for mechanical
installation.
•
•
•
Read the manual carefully before the initial start-up. The producer reserves the right to change
the herein described specifications in case of technical advance of the product.
►
1.800.561.8187
® CS infrared thermometer.
Avoid abrupt changes of the ambient temperature.
Avoid mechanical violence on the head – this may destroy the system (expiry of warranty).
If you have any problems or questions, please contact our service department.
All accessories can be ordered according to the referred part numbers in brackets [ ].
www.
information@itm.com
.com
-
7
]