Huawei LUNA2000-200KWH-2H1 Smart String ESS Maintenance Manual page 163

LUNA2000-200KWH-2H1 Smart String ESS
Maintenance Manual
Figure 27-2 Wiping a polished or damaged area using anhydrous alcohol
Step 3 Paint zinc-rich primer on the damaged coat.
● If the base material is exposed, apply epoxy zinc-rich primer, wait until the
● Select an epoxy zinc-rich primer or acrylic acid top coating with the same color
Step 4 Apply paint evenly to the damaged area based on the damage degree until all
damage traces are no longer visible.
● Ensure that the painting is thin, even, and smooth. There must not be any paint
● In the case that an equipment pattern has different colors, to prevent
Figure 27-3 Repainting a damaged area
Step 5 Wait for 30 minutes and check whether the painting meets the requirements.
Issue 02 (2023-02-28)
NO TICE
paint has dried, and then apply an acrylic acid top coating.
as that of the equipment's surface coating.
NO TICE
drops on the coating.
undamaged areas and those with different colors as the damaged area from
being polluted during repainting, cover such areas using white paper and
adhesive tape before repairing paint.
Copyright © Huawei Digital Power Technologies Co., Ltd.
27 FAQ
157