LUNA2000-200KWH-2H1 Smart String ESS
Maintenance Manual
Paint Damage
Logo and pattern
damage
Dent
Procedure
Step 1 Gently polish the damaged areas using fine sandpaper to remove smudges or rust.
Figure 27-1 Polishing a damaged area using sandpaper
Step 2 Dip a piece of cotton cloth into anhydrous alcohol and wipe the polished or
damaged area to remove dirt or dust. Then wipe off the alcohol with a clean and
dry cotton cloth.
Issue 02 (2023-02-28)
Tools and
Materials
If a logo or pattern has been
damaged, obtain the logo size and
color number and contact a local
advertisement coating supplier to
formulate a repair solution based on
the logo size, color, and damage.
1. If a dent is less than 100 mm
area and 3 mm in depth, fill the
dent with Poly-Putty base and then
perform the same operations as
those for fixing deep scratches.
2. If a dent is greater than 100 mm
area or greater than 3 mm in
depth, contact the local supplier for
an appropriate repainting solution.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Procedure
2
in
2
in
27 FAQ
Description
be smooth.
There must not
be any paint
drops on the
coating.
5. Leave the
repainted area
for about 30
minutes before
performing any
further
operation.
156