Configuring A Direct Connection; Figure 7 Hyperterminal Connection Description Dialog Box - Nortel BayStack Instant Internet 100-S User Manual

Configuring a direct connection

Regardless of the terminal emulation environment you use, you must set the
connection speed to 115200, set the flow control to hardware (RTS/CTS), and
connect the Instant Internet unit's AUX port to the PC's COM1 port.
This procedure provides instructions for configuring the HyperTerminal terminal
emulation software.
Caution: If you are configuring the unit, wait for LED 2 to glow
amber before you proceed.
To create a HyperTerminal PC connection profile:
1
Start the HyperTerminal software.
The Connection Description dialog box opens

Figure 7 HyperTerminal Connection Description dialog box

2 In the Name box, enter a name for the connection.
3
In the Icon area, select an icon for the connection.
4
Click OK.
The Connect To dialog box opens
Chapter 7 Out-of-band management support
(Figure
(Figure 8).
Setting Up the BayStack Instant Internet 100-S Unit
63
7).