Message Indication - Gigaset N670 IP PRO Installation, Configuration And Operation

Incoming calls
An incoming internal call is shown in the display with the internal number and the internal name
of the calling handset.
Press the Talk key
Switch off ringtone:
Reject a call:
Consultation call / Call transfer
You are on a call with an external participant and want to consult with an internal participant or
transfer the call.
Press the INT key
put on hold, both calls are shown in the display
Toggle between the external and internal call:
Transfer the call to the internal participant:

Message indication

Notifications about accepted and missed calls, missed alarms and messages on the network
mailbox are saved in messages list and can be displayed on the handset display.
Which messages are displayed on the handset is defined during handset configuration in the
Missed calls and alarms section (
Missed calls count
If the option is activated, the number of missed and accepted calls will be shown on the handset
display in idle mode.
Message Waiting Indication (MWI)
For each message type (missed call, missed alarm, new message the network mailbox) the MWI
option can be activated or deactivated via the web configurator.
If activated, the LED on the message key
cating missed calls, missed alarms or new messages on the network mailbox.
Using a handset connected to an N670 IP PRO base
to accept the call.
Silence . . . the call can be accepted as long as it is shown on the
display
Press the End call key
select a handset
Press the End call key
p. 51).
flashes, in the case a new message arrives indi-
press the Talk key . . . the external call is
97