Gigaset N670 IP PRO Installation, Configuration And Operation page 31

List of synchronised base stations
All activated base stations contained in the Connected base stations list appear in the Base
station synchronisation list.
It is only available in the Integrator user interface for the user role admin.
Settings Base stations
For each registered base station the following information is shown:
MAC address Hardware address of the base station. With this address the device is
uniquely identified within the LAN.
Base station Name of the base station.
DM Name Name of DECT manager the base station belongs to.
Cluster Number of the cluster to which the base is assigned.
Sync Level Synchronisation level within the sync hierarchy.
A base station that is defined as redundancy sync master is automatically set
to sync level 2
LAN Master The base station acting as LAN master is marked by a
Sync Slave Indicates if the base station is synchronised via DECT or via LAN. For the Sync
master there is no entry in this column.
Status Synchronization status of the base station:
Offline
Deactivated
No sync
Sync
Sync overload
Reference Sync reference:
Sync type:
1
D
D
L
L
R
Synchronisation
1 to indicate that level 2 is able to become level 1.
Not available
Available but not activated
Activated but not synchronised
Activated and synchronised,
Synchronised but DECT overload
Sync type, DECT manager or RFPI, cluster
no Sync Slave function, running free
DECT slave within cluster: name of cluster in Reference
column
DECT slave running inter DM synchronisation rule Best
DECT base of DM: name of DM in Reference column
LAN slave within cluster: name of internal DM in Refer-
ence column
LAN slave running external/inter DM synchronisation
rule LAN Master of DM xy: name of external DM in Refer-
ence column
DECT slave running external RFPI synchronisation rule:
RFPI in Reference column
Base stations
.
31