Creating A Mini Multicell System With N670 Ip Pro Devices - Gigaset N670 IP PRO Installation, Configuration And Operation

N670 IP PRO – Introduction

Creating a mini multicell system with N670 IP PRO devices

To expand the range of the DECT network an N670 IP PRO device can be installed in a network
where another N670 IP PRO is already present. One of these devices acts as a master, the second
device is switched to the Base only role. Two additional N670 IP PRO devices in Base only role
are supported. The master device contains, in addition to the local base station, the components
(Integrator/DECT manager) for managing the mini multicell system.
Configuration via
web interface
LAN
All N670 IP PRO devices build a cluster and synchronise in order to perform handover, roaming
and overload balancing for handsets. Synchronisation takes place via DECT or LAN. Up to eight
simultaneous calls are possible.
Handover
Roaming
Overload balancing A DECT connection (for a call or other administrative or customer
8
N670 IP PRO
DECT master
base station
N670 IP PRO
DECT slave
base stations
A handset switches to a new base station during a call.
A handset in idle mode is connected to the DECT network via a new base.
purpose) is not set up at the current base station, which is fully loaded
with active DECT or media connections, but via a neighbour base station,
which has free resources to setup/accept the new DECT connection.
Cluster