Network Administration; Ip And Vlan Settings - Gigaset N670 IP PRO Installation, Configuration And Operation

Network administration

IP and VLAN settings

This page is used to integrate the device into your company's local network.
It is only available for the user role admin.
Settings Network
If you change the IP address of the device or an error occurs when you are changing
the IP settings, the connection to the web User Interface may be lost.
IP address changed:
An error occurred:
Device name in the network
Enter a label for the device. It is used to identify the device in network communication.
Address assignment
Network type
Select the IP protocol used in your local network: Currently only IPv4 is supported.
IP address type
Select Dynamic, if your device receives the IP address via a DHCP server.
Select Static, if your want to assign a fixed IP address to the device.
If the Dynamic setting is selected, all further settings are automatically configured. They are
displayed and cannot be changed.
If you have selected Static as the address type, you must create the following settings.
IP/LAN
Re-establish the connection with the new address.
Reset the device to the factory settings.
Resetting the base station (
Network administration
p. 15)
23