Using The Network Mailbox - Gigaset N670 IP PRO Installation, Configuration And Operation

Using the network mailbox

The network mailbox accepts incoming calls made via the corresponding line (corresponding
VoIP phone number).
Prerequisites
In order to allow the user to listen voice messages stored one a network mailbox the following
settings are necessary:
On the VoIP PBX
Set up a network mailbox for the VoIP connection that is to be assigned to the handset.
On the N670 IP PRO
In the provider/PBX configuration activate the SIP SUBSCRIBE for Net-AM MWI option
( p. 36). A subscription is established for the purpose of receiving notifications about new
messages on the network mailbox.
In the mobile devices configuration enter the Call number or SIP name (URI) and activate
the network mailbox in the Network mailbox configuration section (
Optional: In the mobile devices configuration enable the Flashing LED (MWI) for network
mailbox option (
light on the Message key.
Playing back messages on the handset
Press and hold
or
Press the Message key
or
Answer Machine
OK
Listen to announcement out loud:
Using a handset connected to an N670 IP PRO base
p. 51). New messages on the network mailbox are indicated by the MWI
(if key 1 has been assigned to the network mailbox)
select the network mailbox
OK
Press the handsfree key
Play Messages OK
p. 50).
OK
Network Mailbox
99