Main Oil Injection; Liquid Injection; Filter Pressure Setpoints; Slide Valve Setpoints - Frick QUANTUM Maintenance Manual

S90-010 M
Page 30

MAIN OIL INJECTION

LIQUID INJECTION

FILTER PRESSURE SETPOINTS

High filter pressure alarm
High filter pressure alarm delay
High filter pressure shutdown
High filter pressure shutdown delay

SLIDE VALVE SETPOINTS

Highest slide valve position to allow
starting of the compressor:
Autocycle minimum position
hot gas bypass or
slide valve setpoint
slide valve setpoint 1
slide valve setpoint 2

SETBACK SCHEDULE

1st Start Time
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday

CONDENSER CONTROL SETPOINTS

Condenser Control Setpoint
Digital Control
Digital Control upper dead band
Digital Control upper dead band delay
Digital Control lower dead band
Digital Control lower dead band delay
Condenser Output #1 sequence order
Condenser Output #2 sequence order
Condenser Output #3 sequence order
Condenser Output #4 sequence order **
** if only digital was enabled
FRICK QUANTUM CONTROL PANEL
On at Discharge Temp.
(32 – 212 deg.F) default 150
On at Oil Temp.
(100 – 150 deg.F) default 122
On when below
On when below
On when below
1st Stop Time
_____
_____
_____
_____
_____
_____
_____
_____
_____
MAINTENANCE
delay (0-300 sec) default 5
delay (0-300 sec) default 5
setting
_____
_____
_____
_____
setting
_____
_____
_____
_____
_____

OPTIONS

2nd Start Time 2nd Stop Time
(range: 0 - 350 psig)
(range: 0 - 20 psig)
(range: 0 - 60 sec.)
(range: 0 - 20 psig)
(range: 0 - 60 sec.)
(range: 0 - 4, 0 = disabled)
(range: 0 - 4, 0 = disabled)
(range: 0 - 4, 0 = disabled)
(range: 0 - 4, 0 = disabled)
default range
25 psig 0 - 60 psig
10 min. 0 - 5 min.
30 psig 0 - 60 psig
15 min. 0 - 5 min.
default range
10% 0 - 100%
10% 0 - 100%
0% 0 - 100%
0% 0 - 100%
0% 0 - 100%
(default: 0.0 psig)
(default: 0.0 psig)
(default: 0.0 psig)
(default: 0.0 psig)
(default: 0.0 psig)
(default: 0.0 psig)
(default: 0.0 psig)
(default: 0.0 psig)
(default: 0.0 psig)