Windows And Os 8.6 To 9.X - Epson Stylus Photo RX500 User Manual

If the RX500 is connected to the computer, you'll see the following message on
your screen the first time you insert a memory card:
This means you have to set up your computer to use the card reader feature.
Follow the instructions below for your operating system.

Windows and OS 8.6 to 9.x

1. Make sure your RX500 is turned on and connected to your computer.
2. Open the memory card cover:
3. Make sure the memory card light
(next to the memory card slots) is
off and that no cards are in any of
the slots. Then insert a card into
the correct slot (see page 84 to
identify the slot you need).
Note:
It won't be possible to insert the card fully; this is normal.
4. If you see a screen asking you to choose a program to launch this action, select
Startup CardMonitor
, and click
action
5. When you see this message, click
6. The Epson PhotoStarter setup assistant
opens. Follow the instructions on the screen
to change any settings from the defaults and
complete the setup steps.
If you don't change any settings, PhotoStarter
automatically copies the images on your
memory card to your hard drive and opens PhotoImpression.
86
Using Memory Cards
, click the checkbox for
.
OK
Next
Always do the selected
:
Memory card
cover