Paper Feeding Problems; Copy Quality Problems - Epson Stylus Photo RX500 User Manual

Make sure to select the copy layout you want. See page 24 for instructions.
If you select
edges, the original size may not be recognized. Select
Enlarge setting (see page 23) and use the
size of your copy (see page 27).

Paper Feeding Problems

If paper doesn't feed, remove it from the sheet feeder. Fan the paper, load it
against the right side behind the tab, and slide the left edge guide against the
paper (but not too tightly).
If paper jams, follow these steps:
1. Press the P
2. Lift up the scanner unit and remove any paper that's inside, including any
small pieces that may have torn off.
Caution:
Clear paper jams by pulling the paper out towards the front of the RX500.
Never pull the paper out in the direction of the sheet feeder.
3. Reload the paper. Make sure the edges are not creased or folded.
4. Turn the RX500 back on and press the x

Copy Quality Problems

If you have any problems with the quality of your copies, try these solutions:
Make sure the document is placed flat against the scanner glass. If only part of
the image is blurred, your document may be wrinkled or warped.
Make sure the RX500 is not tilted or placed on an uneven surface.
Clean the print head; see page 109 for instructions.
If a dotted line appears in the image, clean the scanner glass with a soft, dry,
lint-free cloth (paper towels are not recommended). If the glass is still not
clean, use a small amount of glass cleaner on a soft cloth. Make sure you wipe
off any remaining liquid. Don't spray glass cleaner directly on the glass.
122
Solving Problems
to copy a document with white or very light
Auto Fit Page
button to turn off the RX500.
On
Actual
setting to adjust the
Optional Zoom
button to clear the error.
Color
as the Reduce/