Scanning From A Program - Epson Stylus Photo RX500 User Manual

Scanning From a Program

You can scan from any TWAIN-compliant program—such as Adobe
®
Photoshop or ArcSoft PhotoImpression—using Epson Scan. Epson Scan
provides three scanning modes for progressive levels of control over your scanned
image:
Full Auto Mode
and resolution settings.
Home Mode
adjustments, previewing and cropping capability, and preset configurations
for various types of scans. Includes Color Restoration.
Professional Mode
including Color Restoration. Use this mode if you have experience scanning
and are familiar with color and image adjustments.
Note:
Epson Scan starts in the mode you used last, but you can change the mode at any time.
Tip:
You can restore color in your old photos. See page 68 for details.
1. Open the scanner lid.
2. Place your photo or document face down on the scanner glass, in the upper
left corner. Move your document about 0.1 inch from the top and side edge so
your entire document is scanned.
Note:
You can also place additional small documents or photos and scan them at the
same time.
makes scanning quick and easy, with automatic image type
provides a simple screen giving you automatic image
lets you manually configure advanced image settings,
Move the
photo in about
0.1 inch from
the edges
®
Orient the
photo as
shown

Scanning From a Program

63