Scanning To E-Mail - Epson Stylus Photo RX500 User Manual

Scanning to E-Mail

This section explains how to use the buttons on the RX500 to scan an image,
transfer it to your e-mail program, and attach it to an e-mail.
Note:
You can also scan to e-mail by double-clicking the
your desktop and clicking the Scan to E-mail icon. See Smart Panel Help for details.
1. Make sure the RX500 is connected to your computer.
2. Open the scanner lid.
3. Place your photo face down on the glass in the upper left corner. Move it
about 0.1 inch from the top and side edge so the entire photo is scanned.
Move the
photo in about
0.1 inch from
the edges
Note:
If you place your photo too close to the edges of the scanner glass, the edges may
not be scanned.
4. Close the scanner lid.
5. Press the
Scan
LCD screen:
Press this button until
you see To E-Mail
6. Press the top left button to select
button on the RX500 to switch to scan mode. You see this
EPSON Smart Panel icon on
Orient the
photo as
shown
1.To Photo Card
. Then press the
To E-mail
Scanning Using the RX500 Buttons
OK
button.
OK
81