Restoring Color To Old Photographs; Placing Your Photo And Loading Paper - Epson Stylus Photo RX500 User Manual

Restoring Color to Old Photographs

You can use Epson Scan to restore color to faded photographs and open them in
an application or save them to a file on your computer. If you want to restore and
print one of your old photos, the easiest way is to use the Reprint Photos feature in
Smart Panel (see page 73).

Placing Your Photo and Loading Paper

Follow these steps to place your photo on the scanner glass and load paper.
1. Open the scanner lid.
2. Place your photo face-down on the glass, in the upper left corner. Move your
photo about 0.1 inch from the top and side edge so your entire document is
scanned.
Note:
If you place your photo flush against the guides, the edges next to the guides may
not be copied.
3. Close the scanner lid.
68
Scanning to a Computer
Move the
photo in about
0.1 inch from
the edges
Orient the
photo as
shown