Copying With A Computer - Epson Stylus Photo RX500 User Manual

Copying With a Computer

Follow these steps to use Epson Smart Panel to copy with your computer.
Note:
Some features, such as PhotoEnhance
from the computer.
1. Press the P
2. Open the scanner lid.
3. Place your photo or document face down on the glass, in the upper left corner.
Move your document about 0.1 inch from the top and side edge so your
entire document is scanned.
Move the photo or
document in about
0.1 inch from the edges
Note:
If you place your photo flush against the guides, the edges next to the guides may
not be copied.
4. Close the scanner lid.
28
Copying
button to turn on the RX500.
On
™ and Sepia, are only available when copying
Orient the
photo as
shown