Table of Contents
Advertisement
NO.
Object name
10
Output N
This communication objects of the channel output used for ON/OFF an channel output, the dimmer
channel output ON when the object receive the value is "1". The dimmer channel output OFF when the
object receive the value is "0"
11
Output N
This communication objects of the channel output used for relative diming an channel output. Relative
dimming mode is UP or DOWN.Dimming UP when receive the telegram increase value,and dimming
DOWN when receive the telegram decrease value.
12
Output N
This communication objects of the channel output used for absolute diming an channel output. The
channel output absolute dimming to a brightness according to receive a telegram value.
......
4.3 Objects "Respone"
Respone 1bit status
Respone 1byte status
NO.
Object name
13
Output N
This communication object used response the channel ouput N state, channel state is ON the response
state is "1", Otherwise the state is "0"
14
Output N
This communication object used response the channel ouput N brightness.
......
Function
Channel putput
Relative dimming
Absolute dimming
Function
Respone status
C R T
Respone status
C W U
DimME KNX
Flags
C W U
C W U
C W U
Flags
Data type
DPT 1.001
1bit
DPT 3.007
4bit
DPT 5.001
1byte
Data type
DPT 1.001
1bit
DPT 5.001
1byte
28/35
Advertisement
Table of Contents
