Object/Association/Group Address Define; Function Parameter "General - preussen DimME KNX Product Manual

3.2 Object/Association/Group address define

In following table, The objects is assigned to the some function of the channel output pages, If
active some functions and the object will be valid. One or more group addresses can be
assigned to a object. The association will connect group addresses to the object.
Name
Dimmer 1fold Actuator
Dimmer 2fold Actuator
Dimmer 4fold Actuator
Dimmer 6fold Actuator
Table2: Overview the max. number of the objects, max. number of associations and max.
number of the group addresses
Note: If you use ETS2V1.3, Please import "VD2", But you use the ETS3.0, Please Import "VD3"
to "VD3".

3.3 Function parameter "General"

System delay after recovery(2..255s)
Can operate relay for a delay time 2..255s after the power on. The default value is 2 seconds.
The Min. value is 2 seconds, and the max. value is 255 seconds.
Options: 2...255s
type Max. number of
communication
objects
DIMME 1 KNX
DIMME 2 KNX
DIMME 4 KNX
DIMME 6 KNX
Max. number of
associations
30
50
90
130
Fig1: "General" parameter
window
"In the parameter of the
general windows can set 7
parameters "System delay
after recovery","Cycle send
general telegram and
Enable sequence1-5".
DimME KNX
Max .number
of group
addresses
254 254
254 254
254 254
254 254
11/35