Table of Contents
Advertisement
The status after bus voltage recovery
Fig2.2: "The status after bus voltage recovery "
Set the status of restore mode after power on for each channel.
Options: Off
Defined brightness value
Last brightness value
Off:After power on and the channel's status is off.
Defined brightness value: After power on and the channel's status is defined brightness
value
Last brightness value: After power on and the channel's status is last brightness value
Over temperature protection
Set the mode of the channel when over temperature.
Options: Invalid / Alarm / Off / Reduce power
Invalid: no the function.
Alarm: When over temperature will alarm.
OFF: When over temperature will OFF
Reduce: When over temperature will Reduce power.
DimME KNX
16/35
Advertisement
Table of Contents
