Table of Contents
Advertisement
Quick Links
1-GENERAL ---------------------------------------------------------------------------------------------------------------------------------------- 2
2- HARDWARE ------------------------------------------------------------------------------------------------------------------------------------ 3
2.1
----------------------------------------------------------------------------------------------------------------------------- 3
2.2
----------------------------------------------------------------------------------------------------------------------------- 5
2.2.1 Trailing edge dimming mode---------------------------------------------------------------------------------------------------- 5
2.2.2 Leading edge dimming mode --------------------------------------------------------------------------------------------------- 5
2.2.3 Change the dimming mode ----------------------------------------------------------------------------------------------------- 6
2.3 Dimension drawings ----------------------------------------------------------------------------------------------------------------- 6
2.4
--------------------------------------------------------------------------------------------------------------------------- 7
2.5
3- SOFTWARE ------------------------------------------------------------------------------------------------------------------------------------- 9
3.1
3.2
3.3
3.4
3.5
3.6
------------------------------------------------------------------------------------------------------------------------------- 21
4-COMMUNICATION OBJECTS DESCRIPTION -------------------------------------------------------------------------------------------27
4.1
" -----------------------------------------------------------------------------------------------------------------------27
4.2
4.3
" ---------------------------------------------------------------------------------------------------------------------- 28
4.4
4.5
4.6
4.7
" --------------------------------------------------------------------------------------------------------------------- 30
4.8
" ------------------------------------------------------------------------------------------------------------------------- 31
4.9
4.10
" --------------------------------------------------------------------------------------------------------------------- 32
5-APPLICATION--------------------------------------------------------------------------------------------------------------------------------- 33
5.1
DimME KNX
PRODUCT MANUAL
------------------------------------------------------------------------------------------------------------------------ 2
------------------------------------------------------------------------------------------------------------- 9
---------------------------------------------------------------------------------------------------------- 9
----------------------------------------------------------------------------------------- 11
"------------------------------------------------------------------------------------------------------- 11
---------------------------------------------------------------------------------------------------------------------- 20
" ----------------------------------------------------------------------------------------------------------27
" ---------------------------------------------------------------------------------------------------------- 29
" ---------------------------------------------------------------------------------------------------------------- 29
" -------------------------------------------------------------------------------------------------------------- 30
" ------------------------------------------------------------------------------------------------------------------- 32
--------------------------------------------------------------------------------------------------------- 33
Advertisement
Table of Contents
Summary of Contents for preussen DimME KNX
-
Page 1: Table Of Contents
DimME KNX PRODUCT MANUAL 1‐GENERAL ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 2 1.1‐P ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 2 RODUCT UNCTION 2‐ HARDWARE ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 3 ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 3 ECHNICAL DATA ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 5 IMMING MODE 2.2.1 Trailing edge dimming mode‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 5 2.2.2 Leading edge dimming mode ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 5 2.2.3 Change the dimming mode ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 6 2.3 Dimension drawings ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 6 ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 7 IRING DIAGRAM ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 9 ... -
Page 2: 1-General
* Motor * Curtain * Heating * Other Equipments The rights and the copyright to this manual are exclusively the property of Preussen Automation. 1.1-Product Function The Dimmer Actuators can dimming for1, 2,4and 6 channels independent AC loads. The Control... -
Page 3: 2- Hardware
9-Scene control 10-Scene dimming 11-Sequence control 12-Threshold switch 13-Heating actuator(PWM) 2- Hardware The technical properties of Preussen Automation KNX/EIB Dimmer Actuators as the following sections. 2.1 Technical data Power supply *Operating voltage(supply by the bus) 21...30 V DC, * Current consumption EIB / KNX(operate) <... - Page 4 Standard and Safety Certificated * LVD Standard EN60669-2-1 , EN60669-1 * EMC Standard EN50090-2-2 CE mark * In accordance with the EMC guideline and low voltage guideline Pollutant Comply with RoHS Note: All of loads, at 230 V AC DimME KNX 4/35...
-
Page 5: Dimming Mode
If the trailing edge dimming mode, when power on the red led will flash for 5 sec. *Note: Capacitive load and Resistive load type should use this mode. For example: Tungsten lamp, Incandescent lamp, Water heater, Resistance furnace. DimME KNX 5/35... -
Page 6: Change The Dimming Mode
“Leading edge dimming mode” and “Trailing edge dimming mode”. For example:MD06.1: press “button A” and “button F” together for change the dimming mode. 2.3 Dimension drawings 66mm 49mm DIMME 1 KNX DIMME 2 KNX DIMME 4 KNX DIMME 6 KNX 72mm 216mm 216mm 216mm DimME KNX 6/35... -
Page 7: Wiring Diagram
2.4 Wiring diagram DimME KNX 7/35... - Page 8 Minimum clearance between the various parts of the dimmer and the surrounding parts where fitted d) Minimum dimensions of ventilating opening, if needed, and their correct arrangement. e) The protective devices (e.g. fuses, automatic protective devices, etc.) to be connected to the load to avoid overloading DimME KNX 8/35...
-
Page 9: Maintenance And Cautions
* Installation location should be well-ventilated, pay attention to moisture, shock, dust proof. 3- Software Preussen Automation KNX/EIB Dimmer Actuators database use ETS3.0 to do the design. The device types are DIMME 1 KNX, DimME 2 KNX, DIMME 4 KNX and DIMME 6 KNX,and the databases name are “Dimmer 1fold Actuator”,”... - Page 10 Statistics total ON time Voltage Recovery state Over temperature protection Read temperature Dimming Switch ON/OFF Relative dimming Absolutre dimming function Staircase light Flashing Scene SceneNO.1-64 Threshold Threshold lower Threshold middle Threshold upper Heating Actuator Table1: Database application overview. DimME KNX 10/35...
-
Page 11: Object/Association/Group Address Define
System delay after recovery(2..255s) Can operate relay for a delay time 2..255s after the power on. The default value is 2 seconds. The Min. value is 2 seconds, and the max. value is 255 seconds. Options: 2…255s DimME KNX 11/35... - Page 12 Start with “1”,Stop with “0”: When receives “, then run sequence 1,When receives 0, then stop sequence 1. Start with “0”, Stop with “1”: when receives 0, then sequence 1, When receives 1, then stop sequence 1. DimME KNX 12/35...
- Page 13 Time for step 1(0…65535s) Set the time for the step. The longest time is 65535s. Time for step 1(0…999ms) Set the time for the step. The longest time is 999ms. Set of other steps is same as the step 1. DimME KNX 13/35...
-
Page 14: Function Parameter Channel "N
1 bit only changed: it will be respone when the dimmer state was changed 1 byte always respone: it always respone of the light level value. 1 byte only changed: it will be respone when the light value was changed. DimME KNX 14/35... - Page 15 Enable: Statistics time. ● Alarm when time out (1…65535h,0-invalid) When the device's operating time arrive the setting value will alarm. The value rang is 1…65535h, 0 is invalid. ● Transmit telegram interval when alarm Set the alarm time interval. DimME KNX 15/35...
- Page 16 Set the mode of the channel when over temperature. Options: Invalid / Alarm / Off / Reduce power Invalid: no the function. Alarm: When over temperature will alarm. OFF: When over temperature will OFF Reduce: When over temperature will Reduce power. DimME KNX 16/35...
- Page 17 Set the standard temperature. when the temperature over the standard and this channel will be protection. The range is 70-90. ● Alarm temperature time interval The alarm telegram time interval range is 1-255. Off: When over temperature will off. DimME KNX 17/35...
- Page 18 Set the standard temperature, when the temperature over the standard will be alarm. ● Alarm temperature time interval(1…255s) The time interval range is 1-255. Read temperature (Degrees Celsius) Set the enable to read temperature. Options: Disable / Enable Disable: No allow to read temperature Enable:Allow to read temperature DimME KNX 18/35...
- Page 19 Upper threshold level: Set the upper threshold level. Options: 0%(0)-100%(255) Lower threshold level: Set the lower threshold level. Options: 0%(0)-100%(255) Dimming minimum level: Set the dimming minimum level. Options: 0%(0)-100%(255) Brightness Fig 2.5 Switch ON/OFF or Absolute dimming Brightness Fig 2.6 Relative dimming DimME KNX 19/35...
-
Page 20: A>Dimming Config
Enable: Allow to relative dimming Note:Relative dimming fade time(brightness0%...100%/0..255s), the data length is 4bits Enable absolute dimming Options: Disable / Enable Disable: No allow to absolute dimming Enable: Allow to absolute dimming Note:Ablolute dimming fade time(brightness0%...100%/0..255s), the data length is 1byte DimME KNX 20/35... -
Page 21: A: Function
Fig4: Function window: The window is set the enable for the below function. Enable function “staircase light” Enable function “flashing” Enable function “scene” Enable function “threshold” Enable function “heating” 3.6.1 A: function “staircase light” Fig4.1: “staircases light” window: For staircase application DimME KNX 21/35... -
Page 22: A: Function "Flashing
Warning staircase lighting Options: Disable / Enable Disable: Prohibition Alarm. Enable: Allow send out warning state use warning data point for ON/OFF staircase light. 3.6.2 A: function “flashing” Fig4.2: “flashing” window: Flashing between ON and OFF in this mode. DimME KNX 22/35... -
Page 23: A: Function "Scene
Total 10 scenes, configuration as following, the setting like below. Eace scene is same as following: Output assigned to(scene 1..64): Allocate the scene. Output brightness value: Set the output brightness value 0%..100% Fade time for brighter/darker (0…255s): Set the time for brighter or darker. DimME KNX 23/35... -
Page 24: A: Function "Threshold
( ON or OFF or no action) Options: Unchange / ON / OFF Unchange: The channel switch position no changed. ON: The channel switch position set to ON. OFF: The channel switch position set to OFF DimME KNX 24/35... -
Page 25: A: Function "Heating
Brightness value for switch ON of heating: Config the brightness for the switch ON Fade time for switch ON of heating (0…255s): Config the time for swich ON Fade time for switch OFF of heating (0…255s): Config the time for swich OFF DimME KNX 25/35... - Page 26 Power on and running automatically The PWM runs automatic by the setting YES, The PWM runs by manual when set to NO. Options: NO / YES YES: PWM running automatic at power on. NO: PWM running by manual. DimME KNX 26/35...
-
Page 27: 4-Communication Objects Description
1..5 General Sequence1..5 C W U DPT 1.010 1bit These communication object used to start or stop sequence.Send telegram value “1” for start one sequence,Send telegram value “0” for stop one sequence. 4.2 Objects “Channel N output” DimME KNX 27/35... -
Page 28: Objects "Respone
This communication object used response the channel ouput N state, channel state is ON the response state is “1”, Otherwise the state is “0” Output N Respone status C W U DPT 5.001 1byte This communication object used response the channel ouput N brightness. …… DimME KNX 28/35... -
Page 29: Objects "Statistics On Time
Temperature alarm C W U DPT 1.005 1bit This communication object used to alarm when over temperature. Output N Read temperature C R T DPT 9.001 2byte This communication object used to read the channel output temperature. …… DimME KNX 29/35... -
Page 30: Objects "Staircase Light
…… 4.7 Objects “Flashing” Object name Function Flags Data type Output N Flashing C W U DPT 1.001 1bit This communication object used to flashing of channel light.The channel light flashing when receive the start value. …… DimME KNX 30/35... -
Page 31: Objects "Scene
80h------store scene 1 (If scene allocated) 81h------store scene 2 (If scene allocated) BFh------store scene 64 (If scene allocated) Output N Scene dimming(4bit) C W U DPT 3.007 4bit This communication object used to dimming the scene of channel ouput …… DimME KNX 31/35... -
Page 32: Objects "Threshold
If select “heat with byte control”, this communication object has been showed and valid. Can modify value of PWM by receive 1byte data. output ON always if receive value is 255 , output OFF if receive value is 0, otherwise output PWM according to the value of receiving telegram from bus. …… DimME KNX 32/35... -
Page 33: 5-Application
5-Application 5.1 Program functions diagram Program start General Channel function Disable Sequence Disable Enable Enable Scene Staircase light Flashing Threshold Heating Disable Disable Disable Disable Disable Enable Enable Enable Enable Enable OUTPUT DimME KNX 33/35... - Page 34 -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- DimME KNX 34/35...
- Page 35 -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------- DimME KNX 35/35...