Function Parameter Channel "N - preussen DimME KNX Product Manual

3.4 Function parameter Channel "N"

Fig2: "Channel N" parameter(N=A,B,C...) windows
In the parameter windows of the "Channel N", you can set some common functions.
Through functional selection and download the database to the device, and device will work
in accordance with the selected function.
The response of channel state
If the dimmer was controlled will be respone.
Options: Invalid
1 bit always respone
1 bit only changed
1 byte always respone
1 byte only changed
1 bit always response: it always respone,
1 bit only changed: it will be respone when the dimmer state was changed
1 byte always respone: it always respone of the light level value.
1 byte only changed: it will be respone when the light value was changed.
If the channel is ON, then respone 1
If the dimmer is OFF, respone 0
DimME KNX 14/35