A: Function "Heating - preussen DimME KNX Product Manual

Input value>Upper threshold: If the value of receiving telegram from bus more than the
upper threshold value, the switch will action according to below option ( ON or OFF or no action)
Options: Unchange / ON / OFF
Unchange: The channel switch position no changed.
ON: The channel switch position set to ON.
OFF: The channel switch position set to OFF
Change threshold 1 via bus
Options: Disable / Enable
Disable:No allow to change the threshold 1 value from bus.
Enable:Allow to change the threshold 1 value from bus.
Change threshold 2 via bus
Options: Disable / Enable
Disable:No allow to change the threshold 1 value from bus.
Enable:Allow to change the threshold 1 value from bus.
.

3.6.5 A: function "heating"

Fig4.5: "heating" window
Brightness value for switch ON of heating: Config the brightness for the switch ON
Fade time for switch ON of heating (0...255s): Config the time for swich ON
Fade time for switch OFF of heating (0...255s): Config the time for swich OFF
DimME KNX 25/35