A: Function "Scene - preussen DimME KNX Product Manual

Flashing operation: Three Control modes for this function.
Options: Start with "1", stop with"0", Start with"1", invalid with"0", Start with"1/0",can't stop
Start with "1", stop with"0" Start flashing with 1 and stop flashing with 0.
Start with"1", invalid with"0": Start flashing with 1 and invalid with 0.
Start with"1/0",can't stop: Start flashing with 1 or 0,can't stop.
Fade time of brighter: (0...255s): Fade seconds in the brighter state.
Fade time of darker: (0...255s): Fade seconds in the darker state.
Duration time for brightness: (0...255 Min): Duration minutes in the brightness state.
Duration time for brightness: (0...59 Sec): Duration seconds in the brightness state
Duration time for darkness: (0...255 Min): Duration minutes in the darkness state.
Duration time for darkness: (0...59 Sec): Duration seconds in the darkness state
Flashing number (0...255, 0-Unlimited): The number of flashing, range between 0 and 255.
0 is unlimited.
Brightness after stop flashing: Brightness after stop flashing by overflow counter, the range
is 0%(0)...100% (255).

3.6.3 A: function "scene"

Fig4.3: "scene" window
Fade time of scene dimming: (0...255s): Fade seconds in the brighter state.
Total 10 scenes, configuration as following, the setting like below.
Eace scene is same as following:
Output assigned to(scene 1..64): Allocate the scene.
Output brightness value: Set the output brightness value 0%..100%
Fade time for brighter/darker (0...255s): Set the time for brighter or darker.
DimME KNX 23/35