A: Function "Threshold - preussen DimME KNX Product Manual

3.6.4 A: function "threshold"

Fig4.4: "threshold" window
Brightness value for switch ON of threshold: Config the brightness for the switch ON
Fade time for switch ON of threshold (0...255s): Config the time for swich ON
Fade time for switch OFF of threshold (0...255s): Config the time for swich OFF
Threshold 1 value is (0...255): threshold 1 value between 0 and 255. Default is 80.
Threshold 2 value is (0...255): Set threshold 2 value between 0 and 255. Default is 180.
Input value<Lower threshold: If the value of receiving telegram from bus lower than the
minimum threshold value, the switch will action according to below option ( ON or OFF or no
Unchange)
Options: Unchange / ON / OFF
Unchange: The channel switch position no changed.
ON: The channel switch position set to ON.
OFF: The channel switch position set to OFF
Lower threshold<=Input value<=Upper threshold
If the value of receiving telegram from bus between Lower threshold and Upper threshold, the
switch will action according to below option ( ON or OFF or no action)
Options: Unchange / ON / OFF
Unchange: The channel switch position no changed.
ON: The channel switch position set to ON.
OFF: The channel switch position set to OFF
DimME KNX 24/35