A>Dimming Config - preussen DimME KNX Product Manual

Show the function page: Set the enable and show the function page.
Options: Disable / Enable
Disable: Don't show the function page about dimmer.
Enable: Show the function page, the page is set the function about dimmer.
3.5 A>dimming config
Fig3: A>dimming config
Switching ON fade time(0...255s): Set the time for switch ON.
Note: brightness0%...100%/0..255s
Switching OFF fade time(0...255s): Set the time for switch OFF.
Note: brightness0%...100%/0..255s
Enable relative dimming
Options: Disable / Enable
Disable: No allow to relative dimming
Enable: Allow to relative dimming
Note:Relative dimming fade time(brightness0%...100%/0..255s), the data length is 4bits
Enable absolute dimming
Options: Disable / Enable
Disable: No allow to absolute dimming
Enable: Allow to absolute dimming
Note:Ablolute dimming fade time(brightness0%...100%/0..255s), the data length is 1byte
DimME KNX 20/35