4-Communication Objects Description; Objects "General; Objects "Channel Noutput - preussen DimME KNX Product Manual

4-Communication objects description

Note: In following sections the N=A,B,C...

4.1 Objects "General"

NO. Object name
0 General
This communication object is always active and valid. invert the value send telegram to bus in next
frame. e.g. last telegram value is "1", the next telegram value is "0"
1..5 General
These communication object used to start or stop sequence.Send telegram value "1" for start one
sequence,Send telegram value "0" for stop one sequence.
4.2 Objects "Channel N output"
Function
Send cycles C R T
Sequence1..5 C W U
DimME KNX
Flags Data type
DPT 1.003
1bit
DPT 1.010
1bit
27/35