preussen DimME KNX Product Manual page 18

Fig2.3: "Over temperature protection"
● Compare temperature protection
Set the standard temperature, the devices will be off when the temperature over the standard.
The range is 70-90.
● Alarm temperature(Degrees Celsius)
Set the standard temperature, when the temperature over the standard will be alarm.
● Alarm temperature time interval(1...255s)
The time interval range is 1-255.
Reduce power: When over temperature will reduce power.
Fig2.4: "Over temperature protection"
● Compare temperature base[70-90(Degrees Celsius)]
Set the standard temperature, the devices will be reduce power when the temperature over the
standard. The range is 70-90.
● Reduce power value(-x%/5C)
Set the standard temperature, when the temperature over the standard will be alarm.
● Alarm temperature (Degrees Celsius)
Set the standard temperature, when the temperature over the standard will be alarm.
● Alarm temperature time interval(1...255s) The time interval range is 1-255.
Read temperature (Degrees Celsius)
Set the enable to read temperature.
Options: Disable / Enable
Disable: No allow to read temperature
Enable:Allow to read temperature
DimME KNX 18/35