1-General; Product Function - preussen DimME KNX Product Manual

1-General

Preussen Automation KNX / EIB series dimmer actuator output modules are developed by
Preussen Automation. Using KNX/EIB BUS communicate with other KNX devices. The database
need to be downloaded to the dimmer actuator using ETS2 V1.3 or ETS 3.0, and the document
descript how to use these products . Our products use standard according to EMC, electrical
safety, environmental conditions.
The dimmer actuators are used to control some loads, such as:
* Lighting
* Motor
* Curtain
* Heating
* Other Equipments
The rights and the copyright to this manual are exclusively the property of Preussen
Automation.

1.1-Product Function

The Dimmer Actuators can dimming for1, 2,4and 6 channels independent AC loads. The Control
parameters is:
***Each channel output maximum 6A current
for Dimmer 1fold Actuator, and can not exceed
6A of total current.
***Each channel output maximum 3A current
for Dimmer 2fold Actuator, and can not exceed
6A of total current.
***Each channel output maximum 1.5A
current for Dimmer 4fold Actuator, and can not
exceed 6A of total current.
***Each channel output maximum 1A current
for Dimmer 6fold Actuator, and can not exceed
6A of total current.
DimME KNX 2/35