Removing the Duplex Unit
Follow these instructions to remove the Duplex Unit.
1. Turn off the printer.
2. Unplug the printer's power cord from the electrical outlet.
3. Remove all interface cables from the interface connectors.
4. Open the connector cover and unplug the ends of the Duplex
Unit cable from their connectors.
5. Loosen the screws on the Duplex Unit, then remove the unit
by pulling the upper portion of the unit away from the printer
then lifting the unit up and off the printer.
6. Remove the paper transfer unit.
7. Replace the covers on the printer, and fasten the screws.
8. Plug the power cord into an electrical outlet.
9. Turn on the printer.
Using the Duplex Unit
The Duplex Unit enables you to print on both sides of plain paper
and supports the following paper sizes:
A3, A4, A5, B4, B5, Ledger, Legal, G-Legal, Letter, G-Letter,
Executive, H-Letter
To use the Duplex Unit, select Duplex Print Unit on the Option
menu in your printer driver.
3-22
Handling Options