Installation: Preparing Panel For Enrollment - Alarm.Com Knowledge Base ADC-IS-300-LP Installation Manual

Technical specifications:
• Alarm.com Model Number: ADC-IS-300-LP
• Power Source: Recommended 2 AA 1.5v Energizer Ultimate Lithium Batteries.
• Batteries: Refer to the Batteries section for details
• Operating Temperature Range: 60° to 80°F
• Weight: 3.1 oz. (with batteries and without mounting accessories)
• Dimensions: 3.1'' h x 1.8'' w x 2.3'' d
• Supervisory Interval: 100 minutes (sensor), 3 hours (alarm hardwire)
• Wireless Signal Range: Greater than 400 ft open air
• Color: White
• Recommended Mounting Height and Angle: Refer to the Recommended Install Height and Angle Table
• Motion Profiles & Sensor Range: Refer to the PIR Sensitivity Settings Table
Hardware compatibility requirements
All versions of the Qolsys IQ Panel are compatible with the Image Sensor Version 3.
Service package requirement
Image capture features require a service package that includes one of the following Image Sensor add-ons:
• Images - Alarms: Includes upload of images from panel alarm events only.
• Images - Limited: Includes uploads of images from panel alarm events and disarm events.
• Images - Plus: Includes upload of images from panel alarm events, disarm events, and non-alarm events.
For additional information about Image Sensor add-ons, see
package?.

Installation: Preparing panel for enrollment

Create Alarm.com customer account
Select service package (including an Images add-on) and register the Alarm.com module serial number on the
Alarm.com Partner Portal or MobileTech app.
Register module and test
Power up the panel and initiate a comm-test to ensure the Alarm.com module is properly installed and communicating
with Alarm.com.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Image_Sensor/Image_Sensor_Version_3/Qolsys_IQ_Pa...
What image captures are included in each Images service
Updated: Fri, 10 Mar 2023 20:26:10 GMT
2