Initial Unpacking Check; Installation - Advantech iDAQ-815 User Manual

2.1

Initial Unpacking Check

Before you install your iDAQ modules, please make sure you have the following nec-
essary components when unpacking the package:
DAQ modules*1

Startup manual*1

Terminal blocks

If anything in the packing list is missing, please contact your local support for further
assistance.
2.2

Installation

Below are the steps to insert the iDAQ modules into the iDAQ chassis.
1. Insert the module and follow the guide rail to the end
2. Screw the two thumb screws tight onto the chassis
iDAQ-815 User Manual
Figure 2.1 iDAQ Module Install into iDAQ Chassis
6