2.1
Initial Unpacking Check
Before you install your iDAQ modules, please make sure you have the following nec-
essary components when unpacking the package:
DAQ modules*1
Startup manual*1
Terminal blocks
If anything in the packing list is missing, please contact your local support for further
assistance.
2.2
Installation
Below are the steps to insert the iDAQ modules into the iDAQ chassis.
1.
Insert the module follow the guide rail to the end
2.
Screw the two thumb screws tight onto the chassis
iDAQ-817_821 User Manual
Figure 2.1 iDAQ Module Install into iDAQ Chassis
6