8: Cam Jam; 9: Flip Jam; 10: File Invalid - Magicard 360 NEO User Manual

360 NEO Card Printer – User Guide
Error code 7:3
Reason: The printer detected film was loaded when trying to carry out an operation that requires no film to be
present.

8: CAM JAM

Error code 8:0
Reason: While moving the printhead cam to the closed position, it took too long to detect the trailing edge of
the cam pulley flag.
Error code 8:1
Reason: While initialising the cam, it took too long to detect the leading edge of the cam pulley flag.
Error code 8:2
Reason: While initialising the cam and having detected the leading edge of the cam pulley flag, it took too long
to detect the trailing edge of the flag.
Error code 8:3
Reason: While moving the printhead cam to the open position, it took too long to detect the leading edge of the
cam pulley flag.

9: FLIP JAM

Error code 9:0
Reason: While initialising the flipper, it took too long to detect the start of the blocked region of the flange.
Error code 9:1
Reason: While initialising the flipper and having detected the start of the blocked region of the flange, it took
too long to detect the start of the unblocked region (the start of the slot).
Error code 9:2
Reason: While moving the card backwards to feed into the flipper and having seen the card arrive at the mid
sensor, it took too long for the mid sensor to unblock.

10: FILE INVALID

Error code 10:0
Reason: The printer received a print job. The side number specified for one of the sides of the image data was
invalid. This probably means the print job file was corrupt.
Error code 10:1
Reason: The printer received a print job. The format specified for the image payload was not supported. If
updating the firmware does not fix this, it may be that the print job file is corrupt.
Error code 10:2
Reason: The printer received a print job containing magnetic track data. One of the tracks specified an invalid
track number.
41