Table of Contents
Advertisement
MAIN MENU
TOP LEVEL
>
>
>
>
>
>
>
Menu Notes
1.
Hand Feed Mode:
Hand Feed Mode enables the user to select whether cards are fed from the rear Hopper or by hand via the printer's front panel.
The default setting is OFF.
2.
Mag Test:
The Mag Test option (if applicable) enables verification on encoder operation offline. Sample data is written on to the card's magnetic stripe (by the
printer) and then read back (by the printer) to provide read/write verification.
3.
Standby Time:
Using the +/- keys, Standby time can be selected for 15, 60, 600 minutes or OFF.
360 NEO Card Printer – User Guide
Sub Level 1
Sub Level 2
Dye Film Info.
>
>
>
>
Cards Printed
>
Serial Number
>
Software Info.
>
Hardware Info.
>
Printer Info.
>
Reboot Printer
>
Sub Level 3
>
Dye Film ID
>
Film Used
>
Region
>
Grade
>
>
Serial Number
>
Software Info.
>
Hardware Info.
>
Region >
>
Grade >
>
10
Comments
ID XX250YMCKOK
0%
0
Grade #0
Cards Printed XXXX
XXXXXXX
< Firmware version >
< Issue number >
Region X
Grade #X
Printer Initialises
Advertisement
Table of Contents
