Magicard 360 NEO User Manual page 34

There are two cleaning rollers in your printer that work together: The Orange Tacky Roller and the Blue Sticky
Roller.
The Orange Tacky Roller
The Orange Tacky roller cleans the card surface
upon its entry from the rear feed hopper and is
located inside and towards the rear of the
printer body. It physically sits below the blue
sticky roller.
The roller has a soft surface (slightly tacky to the
touch) and is designed to pick up dust/grit etc.
from the card feeding in from underneath.
The orange roller is easily removed and should
be cleaned regularly using a damp cloth. When
clean, refit the roller (do not discard).
Blue Sticky Roller Pack
360 NEO Card Printer – User Guide
The Orange Tacky Roller
The Blue Sticky Roller
As the name suggests, the blue roller has a sticky
coated layer which is exposed when the paper
wrapper (mentioned above) is removed.
The purpose of the blue roller is to collect and
retain the dust/debris collected from the orange
roller (please see previously). The blue roller is
then replaced as part of the printer cleaning
process. (Please refer to the following page for
replacing the blue roller). A new blue roller is
supplied with each new genuine Magicard dye film
ordered. Alternatively, a Blue Sticky Roller pack
(Pt. 3633-0054) can be ordered through your
Dealer or printer supplier. (This comprises five
rollers and one metal bar).
34