Magicard 360 NEO User Manual page 42

360 NEO Card Printer – User Guide
Error code 10:3
Reason: The printer received a print job containing magnetic track data. The number of bits specified for one of
the tracks was out of range. This probably means that the print job file was corrupt.
Error code 10:4
Reason: The printer received a print job containing magnetic track data. The number of bits specified for one of
the tracks was too great for the provided payload size. This probably means that the print job file was corrupt.
Error code 10:5
Reason: The printer received a print job containing magnetic track data. The bit density specified for one of the
tracks was out of range. This probably means that the print job file was corrupt.
Error code 10:6
Reason: The printer received a print job. The panel ID specified for one of the panels was invalid. This probably
means that the print job file was corrupt.
Error code 10:7
Reason: The printer received a print job. The width or height specified for the card was out of range. This
probably means the print job file was corrupt.
Error code 10:8
Reason: The printer received a print job. The payload provided was not large enough to hold the image width
specified. This probably means the print job file was corrupt.
Error code 10:9
Reason: The printer received a print job. The power adjustment for one of the panels was out of range. This
probably means the print job file was corrupt.
Error code 10:11
Reason: The printer received a print job. The number of copies specified was less than 1. This means that the
print job file is corrupt.
Error code 10:12
Reason: The printer received a print job containing magnetic track data. The number of encoding attempts
requested was less than one.
Error code 10:13
Reason: The printer received a print job containing magnetic track data. The number of verification attempts
requested was less than zero.
Error code 10:14
Reason: The printer received a print job. The x adjustment specified for a panel was out of range. This probably
means the print job file was corrupt.
Error code 10:15
Reason: The printer received a print job. The y adjustment specified for a panel was out of range. This probably
means the print job file was corrupt.
42